Install QingCloud CSI

If you plan to install KubeSphere on QingCloud, QingCloud CSI can be chosen as the underlying storage plugin.

This tutorial demonstrates how to use KubeKey to set up a KubeSphere cluster and configure QingCloud CSI to provide storage services.

Prerequisites

Your cluster nodes are created on QingCloud Platform.

Step 1: Create Access Keys on QingCloud Platform

To make sure the platform can create cloud disks for your cluster, you need to provide the access key (qy_access_key_id and qy_secret_access_key) in a separate configuration file of QingCloud CSI.

1. Log in to the web console of QingCloud and select Access Key from the drop-down list in the top-right corner.

   

2. Click Create to generate keys. Download the key after it is created, which is stored in a csv file.

Step 2: Create a Configuration File for QingCloud CSI

The separate configuration file contains all parameters of QingCloud CSI which will be used by KubeKey during installation.

1. Go to one of the nodes (taskbox) where you want to download KubeKey later and run the following command to create a configuration file.

   vi csi-qingcloud.yaml
   

   An example configuration file:

   config:
     qy_access_key_id: "MBKTPXWCIRIEDQYQKXYL"    # Replace it with your own key id.
     qy_secret_access_key: "cqEnHYZhdVCVif9qCUge3LNUXG1Cb9VzKY2RnBdX"  # Replace it with your own access key.
     zone: "pek3a"  # Lowercase letters only.
   sc:
     isDefaultClass: true # Set it as the default storage class.
   

2. The field zone specifies where your cloud disks are created. On QingCloud Platform, you must select a zone before you create them.

   

   Make sure the value you specify for zone matches the region ID below:

   Zone	Region ID
   Shanghai1-A/Shanghai1-B	sh1a/sh1b
   Beijing3-A/Beijing3-B/Beijing3-C/Beijing3-D	pek3a/pek3b/pek3c/pek3d
   Guangdong2-A/Guangdong2-B	gd2a/gd2b
   Asia-Pacific 2-A	ap2a

   If you want to configure more values, see chart configuration for QingCloud CSI.

3. Save the file.

Step 3: Download KubeKey

Follow the steps below to download KubeKey on the taskbox.

curl -sfL https://get-kk.kubesphere.io | VERSION=v3.0.13 sh -

export KKZONE=cn

curl -sfL https://get-kk.kubesphere.io | VERSION=v3.0.13 sh -

Make kk executable:

chmod +x kk

Step 4: Create a Cluster

1. Specify a Kubernetes version and a KubeSphere version that you want to install. For example:

   ./kk create config --with-kubernetes v1.22.12 --with-kubesphere v3.4.1
   

   Note

   • Recommended Kubernetes versions for KubeSphere 3.4: v1.20.x, v1.21.x, v1.22.x, v1.23.x, * v1.24.x, * v1.25.x, and * v1.26.x. For Kubernetes versions with an asterisk, some features of edge nodes may be unavailable due to incompatability. Therefore, if you want to use edge nodes, you are advised to install Kubernetes v1.23.x. If you do not specify a Kubernetes version, KubeKey will install Kubernetes v1.23.10 by default. For more information about supported Kubernetes versions, see Support Matrix.

   • If you do not add the flag --with-kubesphere in the command in this step, KubeSphere will not be deployed unless you install it using the addons field in the configuration file or add this flag again when you use ./kk create cluster later.

   • If you add the flag --with-kubesphere without specifying a KubeSphere version, the latest version of KubeSphere will be installed.

2. A default file config-sample.yaml will be created if you do not customize the name. Edit the file.

   vi config-sample.yaml
   

   ...
   metadata:
     name: sample
   spec:
     hosts:
     - {name: master, address: 192.168.0.2, internalAddress: 192.168.0.2, user: root, password: Testing123}
     - {name: node1, address: 192.168.0.3, internalAddress: 192.168.0.3, user: root, password: Testing123}
     - {name: node2, address: 192.168.0.4, internalAddress: 192.168.0.4, user: root, password: Testing123}
     roleGroups:
       etcd:
       - master
       control-plane:
       - master
       worker:
       - node1
       - node2
     controlPlaneEndpoint:
       domain: lb.kubesphere.local
       address: ""
       port: 6443
     kubernetes:
       version: v1.22.12
       imageRepo: kubesphere
       clusterName: cluster.local
     network:
       plugin: calico
       kubePodsCIDR: 10.233.64.0/18
       kubeServiceCIDR: 10.233.0.0/18
     registry:
       registryMirrors: []
       insecureRegistries: []
     addons:
     - name: csi-qingcloud
       namespace: kube-system
       sources:
         chart:
           name: csi-qingcloud
           repo: https://charts.kubesphere.io/test
           valuesFile: /root/csi-qingcloud.yaml
   ...
   

3. Pay special attention to the field of addons, under which you must provide the information of QingCloud CSI. For more information about each parameter in this file, see Multi-node Installation.

   Note

   KubeKey will install QingCloud CSI by Helm charts together with its StorageClass.

4. Save the file and execute the following command to install Kubernetes and KubeSphere:

   ./kk create cluster -f config-sample.yaml
   

5. When the installation finishes, you can inspect installation logs with the following command:

   kubectl logs -n kubesphere-system $(kubectl get pod -n kubesphere-system -l 'app in (ks-install, ks-installer)' -o jsonpath='{.items[0].metadata.name}') -f
   

   Expected output:

   #####################################################
   ###              Welcome to KubeSphere!           ###
   #####################################################
   
   Console: http://192.168.0.3:30880
   Account: admin
   Password: P@88w0rd
   
   NOTES：
     1. After you log into the console, please check the
        monitoring status of service components in
        "Cluster Management". If any service is not
        ready, please wait patiently until all components 
        are up and running.
     2. Please change the default password after login.
   
   #####################################################
   https://kubesphere.io             20xx-xx-xx xx:xx:xx
   #####################################################
   

Step 5: Verify Installation

You can verify that QingCloud CSI has been successfully installed either from the command line or from the KubeSphere web console.

Command line

1. Run the following command to check your storage class.

   kubectl get sc
   

   Expected output:

   NAME                      PROVISIONER              RECLAIMPOLICY   VOLUMEBINDINGMODE      ALLOWVOLUMEEXPANSION   AGE
   csi-qingcloud (default)   disk.csi.qingcloud.com   Delete          WaitForFirstConsumer   true                   28m
   

2. Run the following command to check the statuses of Pods.

   kubectl get pod -n kube-system
   

   Note that csi-qingcloud is installed in the namespace kube-system. Expected output (exclude other irrelevant Pods):

   NAME                                       READY   STATUS    RESTARTS   AGE
   csi-qingcloud-controller-f95dcddfb-2gfck   5/5     Running   0          28m
   csi-qingcloud-node-7dzz8                   2/2     Running   0          28m
   csi-qingcloud-node-k4hsj                   2/2     Running   0          28m
   csi-qingcloud-node-sptdb                   2/2     Running   0          28m
   

KubeSphere console

1. Log in to the web console with the default account and password (admin/P@88w0rd) at <NodeIP>:30880. Click Platform in the upper-left corner and select Cluster Management.

2. Go to Pods in Application Workloads and select kube-system from the project drop-down list. You can see that the Pods of csi-qingcloud are up and running.

3. Go to Storage Classes under Storage, and you can see available storage classes in your cluster.

   Note

   For more information about how to create volumes on the KubeSphere console, see Volumes.

Thanks for the feedback. If you have a specific question about how to use KubeSphere, ask it on Slack. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.